Blog

If you’ve ever lain awake listening to your toilet hiss, gurgle, or refill itself every few minutes, you already know how annoying a running toilet is. But beyond the noise, it’s quietly costing you money — a running toilet can waste hundreds of gallons of water a day.

Here’s what’s usually going on, and how to know when it’s time to call a plumber.

The Usual Suspects

1. A worn-out flapper valve
The flapper is the rubber seal at the bottom of your tank that lifts when you flush and drops back down to stop the water. Over time, it warps, cracks, or stops sealing properly, letting water slowly leak into the bowl. This triggers the tank to keep refilling — which is that phantom “running” sound you hear even when no one’s used the bathroom.

2. The fill valve is misbehaving
The fill valve controls how much water refills the tank after a flush. If it’s stuck or set too high, water keeps trickling into the overflow tube instead of shutting off.

3. The chain is tangled or too long
The little chain connecting the flush handle to the flapper can get kinked, caught, or looped in a way that keeps the flapper slightly propped open — enough for a slow leak, not enough to notice at a glance.

4. The float is out of adjustment
The float tells the tank when to stop filling. If it’s set too high, the tank overfills and water constantly spills into the overflow tube.

Quick Things You Can Check Yourself

  • Take the lid off the tank and look at the flapper — is it cracked, warped, or coated in mineral buildup?
  • Check that the chain has a little slack but isn’t tangled.
  • Look and listen for water trickling into the overflow tube — that points to a float or fill valve issue.

When It’s a 5-Minute Fix vs. When to Call a Plumber

A flapper replacement is genuinely one of the easiest DIY plumbing fixes — they’re inexpensive and take most homeowners under 15 minutes.

But call a plumber if:

  • You’ve replaced the flapper and it’s still running
  • The toilet rocks, leaks at the base, or shows signs of a cracked tank
  • Your water bill has spiked and you can’t pinpoint why

A running toilet feels minor, but it’s one of the most common ways homeowners bleed money without realizing it. If the fix isn’t obvious after a quick look, it’s worth having a professional take a look before your next water bill arrives.

Note: Your leak may not have anything to do with your toilet; it’s often an irrigation issue. Call us for more information.

A slow or fully clogged drain is one of the most common plumbing headaches — and one of the most Googled. Whether it’s your kitchen sink, bathroom sink, or shower, the good news is that many clogs can be cleared without calling anyone. The bad news? Some of the most popular “quick fixes” can actually make things worse.

Here’s how to handle it right.

What’s Usually Causing the Clog

  • Bathroom drains: hair, soap scum, and toothpaste residue build up along pipe walls
  • Kitchen sinks: grease, food particles, and coffee grounds that solidify inside the pipe
  • Shower/tub drains: hair combined with soap buildup, often forming a solid clog just past the drain opening
  • Main line clogs: if multiple drains in the house are slow at once, the problem may be further down the line, not just at one fixture

Safe DIY Methods to Try First

1. Boiling water (grease clogs only)
Pour boiling water down the drain in stages, letting it work for a few seconds between pours. This is effective on grease-based kitchen clogs but won’t do much for hair clogs.

2. A plunger
A standard sink plunger (different from a toilet plunger) can dislodge many minor clogs. Make sure there’s enough water in the sink to create a seal, and plug any overflow holes with a wet rag first.

3. Tools
For hair clogs in particular, a inexpensive plastic drain snake (sometimes called a “zip-it”) can pull out surprising amounts of gunk in seconds. This is often the single most effective DIY tool for bathroom drains.

Note: Pipes can be weak. If you use tools that create pressure, it’s safer (and cheaper) to call a professional for these types of issues).

What to Avoid

  • Chemical drain cleaners — They can damage older pipes, and if the clog doesn’t clear, you’re left with a sink full of caustic chemicals a plumber then has to deal with safely.
  • Excessive plunging on a fully blocked line — If nothing is moving at all, forcing it can push the clog deeper or stress old pipe joints.

When to Call a Plumber

  • The clog keeps coming back within days or weeks of clearing it
  • Multiple drains are slow or backed up at the same time
  • You hear gurgling from other drains when running water somewhere else
  • Water backs up out of a different fixture (like the shower backing up when you run the washing machine)

Persistent or recurring clogs are a sign that the blockage was not cleared properly the first time.

You open your water bill and it’s way higher than usual, even though nobody in the house has changed their habits. Before you assume the worst or blame the meter, it’s worth checking for a leak. The City of San José says that if your bill climbs without a change in how you use water, chances are you have one.

Here’s how to track it down, and when to bring in a plumber.

Why a Small Leak Adds Up

Leaks don’t have to be dramatic to be expensive. A toilet that keeps trickling or a slow drip behind a wall can run around the clock, and you won’t notice until the bill arrives. The city recommends checking for leaks at least once or twice a year, which is a good habit even when your bill looks normal.

Step 1: Check Your Water Meter

  1. Turn off every faucet and appliance in the house, including the dishwasher, washing machine, and ice maker.
  2. Find your meter and look at the leak indicator (often a small dial or triangle) or note the reading.
  3. If the indicator is moving, or the reading has changed after 15 to 30 minutes with everything off, water is going somewhere it shouldn’t.

Step 2: Test Your Toilets

Toilets are one of the most common sources of hidden leaks. After the water has been still for some time (at least an hour), add a few drops of food coloring to the tank (not the bowl) and wait about 15 minutes without flushing. If color shows up in the bowl, the flapper isn’t sealing.

Valley Water offers free dye tablets for this test, along with other water-saving items. You can request them through their website or by calling their water conservation hotline at (408) 630-2554.

Step 3: Look at Faucets, Irrigation, and Appliances

  • Check under sinks and around the base of faucets for drips or damp cabinets.
  • Look at your water heater and washing machine hoses for moisture.
  • Inspect sprinkler heads and irrigation lines for broken heads, soggy patches, or valves that stick open. A leaking irrigation line can go unnoticed for weeks. Many landscaping systems are old and out of date; even if a licensed landscaped installed the equipment, chances are they may be failing with an ongoing leak without it being obvious.
    • Repairs are usually not expensive, but require a working knowledge of solenoid valves, vacuum breakers, and anti-siphonage components.

Know How to Shut Off Your Water

Each branch of your irrigation should have its own shutoff valve (front vs. back). If you find a serious leak, shut the water off at the shut-off valve near your house, not at the meter. If your home doesn’t have a shut-off valve, call your water provider so a technician can shut it off for you. If your home doesn’t have an independent irrigation shutoff, Plumb Perfect can install one.

Fix Leaks Quickly

Don’t wait to see if the next bill comes down. For customers of the City’s municipal water service, the appeal form states that water use from a leak doesn’t qualify for a bill adjustment, and customers are responsible for keeping their pipes and fixtures in good condition. Policies can differ by water provider, so check with yours. Either way, the sooner a leak is fixed, the less water you pay for.

When to Call a Plumber

Call a professional if:

  • The meter keeps moving after you’ve checked toilets, faucets, and irrigation.
  • You see stained walls or ceilings, musty smells, or warm spots on the floor.
  • You can hear water running when nothing is on.
  • You’re not comfortable repairing the problem yourself.

Hidden leaks behind walls, under floors, or underground are hard to find on your own. That’s where our Leak Repair service comes in: we locate the source, fix it properly, and help you avoid the damage and surprise bills a leak can cause.

We’ve found that some leaks are conglomerate of seepages (small leaks) that dry up under your house over the course of a few days and then seep more. We’re experts at locating and repairing these on a more permanent basis.

Seeing a high water bill and not sure why? Contact Plumb Perfect today to schedule a leak inspection.

Most of us don’t think about the water heater until the shower goes cold. The good news is that water heaters usually give warning signs before they fail completely. Catching them early can mean the difference between a planned replacement and a flooded garage.

Warning Signs to Watch For

  • Age. Tank water heaters typically last about 8 to 12 years. If you’re not sure how old yours is, look for the label on the unit with the manufacture or installation date. Have the make and model ready when calling Plumb Perfect. It helps us discern the type of water heater etc. you require.
  • Water around the base. Moisture or pooling under the tank means something has failed. Leaks from the tank itself usually mean replacement.
  • Rust-colored hot water. Tank linings wear down over time, and rusty water can mean the tank is corroding.
  • Strange noises. Banging, popping, rumbling, or hissing can point to sediment buildup or a failing heating element.
  • Not enough hot water, or uneven temperature. Sediment takes up space in the tank, which is why you run out of hot water faster. Note: Water heaters fill with cold water as the hot water is used. This cools the water heater and causes the heater to turn back on. The volume of hot water that you’re not getting in your shower is also a symptom that can be repaired.

What You Can Safely Check Yourself

  1. Look at the age label on the tank.
  2. Use a flashlight to check the floor and walls around the heater for dampness.
  3. Note any new sounds or changes in how long hot water lasts.
  4. Keep the area around the heater clear for access and safety.

If you smell gas, leave the house and call your gas utility from outside. Don’t try to troubleshoot it yourself.

Many homeowners also flush the tank about once a year to clear sediment, especially in areas with hard water. If you’re not comfortable doing it, we can help.

Repair or Replace?

A good rule of thumb: if the heater is over 10 years old and needs a major repair, or if the repair would cost more than half the price of a new unit, replacement usually makes more sense. A leaking tank, frequent repairs, or rising energy bills point the same way. A newer, more efficient unit can also lower your energy costs over time.

Why a Permitted Installation Matters

Replacing a water heater isn’t just swapping one tank for another. In California, installations must follow the California Plumbing Code, and in San Jose a replacement typically requires a permit. A properly done install includes:

  • Seismic strapping. Two straps are required, one in the upper third of the tank and one in the lower third, with the lower strap kept at least four inches above the controls. In earthquake country, this keeps the heater from toppling.
  • Correct relief valve piping. The temperature and pressure relief valve needs a properly routed discharge line. It shouldn’t drain into the drip pan.
  • Proper venting and gas connections for gas models.
  • A drain pan and protection where a leak could cause damage, such as in an attic or garage.
  • An inspection that confirms the work meets code.

Shortcuts here can cause problems later, including water damage, safety hazards, and headaches when you sell your home. We handle the permit and make sure the installation is done to code, so you don’t have to chase it down.

When to Call a Plumber

Call Plumb Perfect if you notice:

  • Leaks or pooling water at the base
  • Rusty hot water or repeated cold showers
  • Banging or popping noises
  • A heater that’s more than 10 years old and starting to struggle
  • Any smell of gas (leave the house first, then call your gas utility)

Whether you need a repair, a flush, or a full replacement, we’ll give you honest advice and an installation done right the first time.

Is your water heater showing its age? Contact us today to schedule an inspection.